You can scan NFC/RFID tags in difficult-to-reach places with the Bartec RFID Reader X IS. When using a tag reader, you may read data from the OLED screen, send data via Bluetooth, or retrieve data from the tag’s internal memory through USB.
When using the Bartec RFID Reader X, here are some important safety tips:
- All gaskets must be present and working to provide IP protection. The two sections of the housing must not be separated by a wide gap in width.
- The device may only be charged outside ex-hazardous areas using the USB cable with isafe Protector or other equipment approved by Bartec GmbH.
- USB-connections to other equipment are only allowed outside ex-hazardous areas using the USB cable with isafe Protector or other equipment approved by BARTEC Gmb.
- The device may be charged only at temperatures between 5 °C … 35 °C
- The device must not be exposed to abrasive acids or bases.
- The device must not be taken into Zones 0 or 20
- Only accessories approved by BARTEC GmbH may be used
Features:
- ATEX Zone 1/21
- IECEx
- Bluetooth 4.0 LE
- The capacity of battery for 1000 Bluetooth readings
- Supported RFID standards: LF, HF, and UHF
- Ambient temperature: -20 °C to +60 °C
- Dimensions: 190 mm x 30 mm x 35 mm
- Weight: 130 g
Specifications:
Rating | Zone 1/21 |
Protection class | IP 64 |
Dimensions | 190 mm x 30 mm x 35 mm |
Weight | 130 g |
Display | OLED, 4 rows |
Interface | Bluetooth 4.0 LE |
Memory | 1000 readings (UID + date + time) |
Bluetooth | 4.0 LE |
Supported RFID standards | LF, HF and UHF |
What others are saying
There are no contributions yet.