Intrinsically Safe Antenna Coupler SOLEXY – RX Series

SKU: N/A
(1 customer review)

Intrinsically Safe Antenna Coupler SOLEXY – RX Series is ATEX Zone 1/21 and Class I Division I, Class II Division I hazardous areas certified. Backed up with ATEX Apparatus, IECEx apparatus, and USA and Canada Listed Equipment certifications. It is also capable of blocking DC signal and provides a very high impedance to low-frequency AC signal. Other excellent features included: N Female antenna connection suitable for N Male antenna,3/4” npt-m thread connection, stainless steel housing, double connector execution, no coax cable, RP-SMA Female coaxial connector suitable for RP-SMA Male radio connection and ax RF power input 2 Watts (33dBm).

ATEX Rating

Hazardous Area Rating

IECEx Certified

$39857

Price Depends on product option
Make a selection to update price

Shipping Time: 4 weeks

Need faster options? Contact our Hazardous Areas Experts now for quick alternatives!

Trusted Clients

  • Logo PH66
  • Logo  Exxon
  • Logo Bp
  • Logo Conoco Phillipis
  • Logo Irwing
  • Logo Bayer
  • Logo Tesoro
  • Logo Northen TIer
  • Logo Udelhoven
  • Logo Aloha petroleum
  • Logo Rand
  • Logo Arrow Energy
  • Logo Schlumber
  • Logo Afton
  • Logo Holly frontier
Similar Category:

Intrinsically Safe Antenna Coupler SOLEXY – RX Series

  • ATEX Zone 1/21
  • Class I Division I
  • Class II Division I
  • IECEx
  • ATEX Apparatus Certified
  • IECEx apparatus certified
  • The USA and Canada Listed Equipment (cQPSus)
  • RXN3S0200RXN: optimized frequency range from 700MHz to 3,9GHz & 4,6GHz to 6GHz
  • RXN3S0200JXN: optimized frequency range from 100MHz to 1,4 GHz
  • N Female antenna connection suitable for N Male antenna
  • 3/4” npt-m thread connection
  • Stainless steel housing
  • RP-SMA Female coaxial connector suitable for RP-SMA Male radio connection
  • double connector execution, no coax cable
  • max RF power input 2 Watts (33dBm)
  • ambient temperature range -40°C to +85°C (T5) / +70°C (T6)

Introducing the new Intrinsically Safe Antenna Coupler SOLEXY – RX Series is designed to be used directly with listed explosion housings or conduit fittings. This coupler is an integrated blocking circuit that prevents hazardous energy from reaching the antenna if a radio, modem, or access point failure occurs. It also allows antenna removal in hazardous areas.

The coupler’s powerful design allows for the connection to approximately any radio and antenna. It is a highly flexible cost-effective solution to hazardous area radio system deployment. The coupler can also be used as a cable bulkhead.

Solexy I S Antenna Barrier

The Antenna Coupler function is to block DC signal and provide a very high impedance to low-frequency AC signal. Fitting is approved for hazardous locations and can be installed with a simple wrench.

Features

  • Short Circuit Protection – includes integrated blocking circuitry
  • Environmental Protection – All required circuitry is recessed into the fitting and encapsulated against the harsh environment.
  • Certification – The RX series is certified ATEX, IECEx, and for USA and Canada as an apparatus, and can be installed per the conditions of acceptability, without further assessment. North America approval (the USA and Canada ) includes Class and Divisions and Zones. IECEx certifications are issued from an Australian noticed body, therefore RX can be installed in Queensland mine.
  • No Sealing Fitting Required – Permits a wide variety of passive antennas to be installed in hazardous areas.
  • Antennas may be removed and/or installed with power on. Perfect for a cable bulkhead connection.
  • Isolated Antenna Ground – optional antenna ground isolation ( RX 1..) from housing ground, combined with the positive circuit, solves ground loop issues in case of remotely mounted antennas and prevents potential ground noise to interfere with RF signal.

Properties

Solexy’s patented (7,057,577) Explosion-Proof Antenna Coupler permits the installation of non-Ex-certified antennas in hazardous areas.
This coupler is designed to be used directly with listed explosion-proof housings or conduit fittings.

An integrated blocking circuit prevents hazardous energy from reaching the antenna if a radio, modem, or access point failure occurs. It also allows for antenna removal in hazardous areas.

The coupler’s robust design allows for connection to practically any radio and antenna. It is a highly flexible and cost-effective solution to hazardous area radio system deployment. The coupler can also be used as a cable bulkhead.

Fitting is approved for hazardous locations and can be installed with a simple wrench.

Specifications

ATEX certification
nr. TÜV CY 18 ATEX 0206158 X
Ex I M2 (M1) Ex db mb [ia Ma] I Mb
II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T5…T6 Gb
II 2 (1) D Ex mb tb [ia Da] IIIC T80°C…T100°C Db
Standard Ref.EN 60079-0, EN 60079-1, EN 60079-11, EN 60079-18, EN 60079-31
IECEx certification
nr. IECEx MSC 19.0001X
Ex db mb [ia Ma] I Mb
Ex db mb [ia Ga} IIA/IIB/IIC T5….T6 GbEx mb tb [ia Da] IIIC T80°….T100°C Db
Standard Ref.IEC 60079-0, IEC 60079-1, IEC 60079-11, IEC 60079-18, IEC 60079-31
USA & Canada certification
cQPSus LR-1504-3
Class I, Division 1, GROUP ABCD; Class II, Division 1, GROUP EFG
[Ex ia Ga] IIC; [Ex ia Da] IIIC
Class I, Zone 1, AEx db mb [ia Ga] IIA/IIB/IIC T6...T5 Gb
Zone 21, AEx mb tb [ia Da] IIIC T80°C...100°C Db
Ex db mb [ia Ga] IIA/IIB/IIC T6...T5 Gb
Ex mb tb [ia Da] IIIC T80°C...T100°C Db
Standard Ref.CAN/CSA C22.2 No. 60079-0 UL 60079-0
CAN/CSA C22.2 No. 60079-1 UL 60079-1
CAN/CSA C22.2 No. 60079-11 UL 60079-11
CAN/CSA C22.2 No. 60079-18 UL 60079-18
CAN/CSA C22.2 No. 60079-31 UL 60079-31
CAN/CSA C22.2 No. 60950-1 UL 60950-1
CAN/CSA C22.2 No. 25-17 UL 1203
CAN/CSA C22.2 No. 30-M1986
CAN/CSA C22.2 No 157 UL 1203 UL 508
CAN/CSA C22.2 No. 94.2-15 UL 508 NEMA 250-2014
Maximum Fault Voltage250VDC, 250VAC 50-60Hz
Approximate Weight0.32 kg (70.6 lb)
NEMA ratingProvides a NEMA 4X connection when connected to a NEMA 4X rated enclosure
Impedance50 Ω
Ambient Temperature Range-40°C (-40°F) to +85°C (+185°F) when max RF input = 2W
(T5) (standard)
-40°C (-40°F) to +80°C (+176°F) when max RF input = 6W (T5) (optional, consult factory)
-40°C (-40°F) to +70°C (+158°F) when max RF input = 2W
(T6) (standard)
-40°C (-40°F) to +65°C (+149°F) when max RF input = 6W (T6) (optional, consult factory)
Approximate Insertion Loss (dB)
FrequencyJ versionR version
100 MHz1.3-
500 MHz0.41.2
1.4 GHz0.40.6
1.7 GHz0.50.6
2.5 GHz0.80.8
3.9 GHz-1.1
4.9 GHz-1.8
5.4 GHz-1.4
6.0 GHz-2.0

Intrinsically Safe Antenna Coupler SOLEXY – RX Series Certifications:

Intrinsically Safe Antenna Coupler SOLEXY – RX Series Other Resources:

Reviews & Questions

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

What others are saying

  1. Offshore RigMan88

    Robust design that allows connection to practically any radio and antenna

    Offshore RigMan88

    This Intrinsically Safe Antenna Coupler from SOLEXY is designed to be used directly with listed explosion proof housings or conduit fittings. It features a robust design that allows connection to practically any radio and antenna. Highly recommended for Zone 1, Class 1 Division 1 areas.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest