Fan Accessories
RAMFAN ECKO Flex Conductive Duct
$140.40In Stock
Your Global Authority In Hazardous Areas
Your Global Authority In Hazardous Areas
Your cart is empty.
Explosion Proof Fan Canarm SD10-XPF features a rugged steel welded box housing that has a durable powder-coated finish. It is certified for Class 1 Division 1 Group C and D hazardous area use, which makes it a suitable explosion-proof fan inside atmospheres containing gases or vapors of equivalent hazard. Easy to install and requires less maintenance. Weighs 39 lbs., single speed, and 10-inch fan size.
| Country of Origin | Canada (CA) |
| Hazardous Area Rating | Class I, Division 1 Group C, D, Class II Division 1 Group F, G |
Canarm explosion-proof fans follow a tradition of quality in design, materials, and construction. Using our quality “Standard Fan” housing and motor mount as the basis for design, we have developed an efficient, economically priced explosion-proof fan. All Explosion Proof Fans have a single speed and dual-voltage explosion-proof motor.
Class I, Division 1 Group C - Atmospheres containing ethyl ether, ethylene, gases, or vapors of equivalent hazard.
Class I, Division 1 Group D - Atmospheres such as acetone, ammonia, benzene, butane, cyclopropane, ethanol, gasoline, hexane, methane, natural gas, naphtha, propane, or gases or vapors of equivalent hazard.
Class II, Division 1 Group F - Atmospheres containing carbonaceous dust, including carbon black, charcoal, coal, or coke dusts that have more than 8% total entrapped volatiles, or dusts that have been sensitized by other materials so that they present an explosion hazard.
Class II, Division 1 Group G - Atmospheres containing combustible dusts not included in group E or F, including flour, grain, wood, plastic, and chemicals.
| FAN SIZE | A X A SQUARE | B | C | D c/c | E | N |
| 8" | 13 1/4" | 17 1/2" | 4" | 12" | 10 3/4" | 2 |
| 10" | 15 1/4" | 17 1/2" | 4" | 14" | 12 3/4" | 2 |
| 12" | 17 1/4" | 20 1/2" | 6" | 16" | 14 3/4" | 3 |
| 18" | 23 1/4" | 20 1/2" | 6" | 22" | 20 3/4" | 4 |
| 24" | 29 1/4" | 20 1/2" | 6" | 28" | 26 3/4" | 5 |
| MODEL | FAN SIZE | HP | AMPS | RPM | 0" SP | .05" SP | .10" SP | .25" SP | FRAMING | WEIGHT |
| SD08-XPF | 8" | 1/3 | 6.6/3.3 | 1625 | 320 | 280 | 240 | - | 11" X 11" | 38 |
| SD10-XPF | 10" | 1/3 | 6.6/3.3 | 1625 | 620 | 575 | 530 | - | 13" X 13" | 39 |
| SD12-XPF | 12" | 1/3 | 6.6/3.3 | 1625 | 1640 | 1600 | 1540 | 1390 | 15" x 15" | 42 |
| SD18-XPF | 18" | 1/3 | 6.6/3.3 | 1625 | 3200 | 3150 | 3090 | 2920 | 21" x 21" | 60 |
| SD24-XPF | 24" | 1/3 | 6.6/3.3 | 1625 | 5500 | 5400 | 5310 | 5100 | 27" x 27" | 72 |
NOTE: RPM Min (minimum) is determined when louvres are opened one inch
NOTE: Wind has a significant effect on exhaust fans. A 10 mph wind creates a 0.05” pressure gainst the fan. A 20 mph wind creates 0.20” pressure, and 30 mph creates 0.45” pressure. These pressures are in addition to the static pressure in the building. Wind blocks or hoods should be included in all designs where fans will be subjected to winds above 10 mph.
