Your Global Authority In Hazardous Areas
Your Global Authority In Hazardous Areas
Your cart is empty.
Engineered for volatile environments, the XP Climate Control EP-MS12HP-1-2-X-(IE)-216-1Z is a Class 1 Division 2 (Groups C & D) certified explosion-proof mini split heat pump delivering 12,000 BTU/h of high-efficiency heating and cooling. Built with DC Inverter technology, salt-spray-tested anti-corrosive coils, and extreme low-ambient operation, it provides dependable, NEC-compliant climate control for oil & gas, chemical, and industrial field facilities.
| Country of Origin | United States (US) |
| Certification | Class 1 Division 2, Groups C and D Interior / Exterior |
The XP Climate Control EP-MS12HP-1-2-X-(IE)-216-1Z is an industrial-grade, explosion-proof single-zone mini-split heat pump engineered specifically for hazardous locations demanding uncompromised safety and climate control. Certified for Class 1 Division 2, Groups C and D across both interior and exterior sections, this 12,000 BTU/h system is designed for refineries, chemical plants, offshore platforms, and control buildings where ignitable concentrations of flammable gases, vapors, or liquids may be present. Built to exceed stringent NEC code compliance, it ensures facility personnel and mission-critical electronics stay protected against thermal extremes without posing an ignition hazard.
Powered by high-efficiency G20 DC Inverter technology with power factor correction and ultra-low-frequency torque control, this system provides optimized energy efficiency with a 19.0 SEER2 and 8.5 HSPF2 rating. It delivers reliable, low-ambient performance—operating down to 0°F in cooling mode and -13°F in heating mode—with factory-installed compressor and basepan electric heaters, intelligent defrosting, and a factory-installed indoor A2L leak detection sensor for modern R32 refrigerant management. Complete with anti-corrosive 500-hour salt-spray-tested blue fins, explosion-proof motors with overload protection, 6-speed airflow control, and an intuitive LCD controller with 'I Feel' intelligence, it guarantees resilient, glove-friendly operation in the harshest industrial climates.
✅ Class 1 Division 2, Groups C & D Certified (Interior & Exterior Units) Certificate of Conformance NEC
✅ High-Efficiency G20 DC Inverter Technology Memory / Power Failure Auto-Recovery & Self-Diagnosis
✅ 500-Hour Salt Spray Tested Acrylic-Resin Anti-Corrosive Blue Fin Coating (Indoor & Outdoor Coils)
✅ Built-in Wi-Fi Interface & Wired Controller Interface for Remote and Facility Integration
✅ Factory-Installed A2L Leak Detection Sensor & Explosion-Proof Motor with Overload Protection
✅ Integrated Basepan & Compressor Electric Heaters with Intelligent Preheating & Defrosting
✅ Wide Operating Range: Low-Ambient Cooling from 0°F to 118°F and Heating from -13°F to 75°F
✅ Intelligent Remote Sensing with 'I Feel' Function, Room Temperature Display, and LCD Screen Lock
✅ 6-Speed Crossflow Indoor Fan with Auto Vertical Swing, Turbo Mode, Quiet Mode, Freeze Guard (46°F)
🔹 Standard Unit (208–230V / 1Ph / 60Hz): Indoor wall unit, outdoor condenser, and wireless remote
| Feature | Details |
|---|---|
| Model Number | EP-MS12HP-1-2-X-(IE)-216-1Z |
| System Type | Explosion-Proof Single Zone Mini Split Heat Pump |
| Hazardous Certification | Class 1 Division 2, Groups C & D (Interior & Exterior) |
| Code Compliance | Certificate of Conformance to NEC Codes |
| Nominal Cooling Capacity | 12,000 BTU/h (Range: 3,070 – 13,300 BTU/h) |
| Nominal Heating Capacity | 12,000 BTU/h @ 47°F (Range: 3,070 – 14,600 BTU/h) |
| Low-Temp Heating Capacity | 9,700 BTU/h @ 17°F / 9,100 BTU/h @ 5°F |
| Efficiency Ratings | SEER2: 19.0 / EER2: 9.75 / HSPF2: 8.5 / COP @ 5°F: 1.75 |
| Cooling Operating Range | 0°F to 118°F (-18°C to 48°C) |
| Heating Operating Range | -13°F to 75°F (-25°C to 24°C) |
| Compressor Type | GREE G20 / Single Cylinder / 1-Stage Inverter |
| Refrigerant Type & Charge | R32 / 17.6 oz (Pre-charged up to 25 ft) |
| Safety Sensor | Factory-Installed A2L Indoor Leak Detection Sensor |
| Coil Construction & Protection | Copper Tube / Aluminum Fin Blue Anti-Corrosive Coating (500 Hrs Salt Spray Tested) |
| Power Supply | 208–230V / 1-Phase / 60 Hz (Outdoor unit powered) |
| Voltage Range | 187V – 253V |
| Rated Current (Cooling / Heating) | 7.02 A / 7.47 A |
| MCA / MOCP | MCA: 12 A / MOCP: 15 A |
| Interconnecting Wire | 14/4 AWG |
| Line Set Sizes | 1/4" Liquid / 3/8" Gas (Flared Connections) |
| Piping Length (Min – Max) | 10 ft – 66 ft (Max Elevation: 40 ft) |
| Indoor Unit Dimensions (W x H x D) | 40" x 10-53/64" x 7-7/8" |
| Indoor Unit Weight (Net / Gross) | 31.8 lbs / 36.3 lbs |
| Indoor Airflow (Min – Max) | 182 – 424 CFM (6 Fan Speeds) |
| Indoor Sound Level (Min – Max) | 27 – 47 dB(A) |
| Outdoor Unit Dimensions (W x H x D) | 28-13/16" x 31" x 16-27/32" |
| Outdoor Unit Weight (Net / Gross) | 134.2 lbs / 139.7 lbs |
| Outdoor Sound Pressure Level | 52 dB(A) |
| Control Interfaces | Wireless LCD Remote, Wired Controller Interface, Wi-Fi Enabled |
🔗 Class 1 Division 2, Groups C & D – (Interior & Exterior)
🔗 NEC Code Conformance – Certificate of Conformance compliance with National Electrical Code
🔗 ASTM B117 (500-Hr Salt Spray) – Acrylic-resin blue fin coating protecting heat exchanger coils
🔗 UL / NEMA Hazard Protection – Explosion-proof motor enclosures for fail-safe thermal management
🔗 Download Datasheet
🔹 Oil & Gas (Offshore Rigs, Refineries, Wellhead Shelters, Pipeline Stations)
🔹 Chemical Plants & Petrochemical Processing Facilities
🔹 Mining & Explosive Dust/Vapor Transition Zones
🔹 Labs & Battery Storage Facilities
🔹 Manufacturing & Paint Spray / Solvent Storage Rooms
📦 1x Indoor Evaporator Section (Wall-Mounted)
📦 1x Outdoor Condenser Section (Inverter-Driven)
📦 1x Factory-Installed Indoor A2L Leak Detection Sensor
📦 1x Wireless Remote Controller with LCD Display
📦 1x Wall Mounting Bracket for Indoor Unit
📦 1x Composite Drain Pan Assembly
📦 1x Owner's & Maintenance Manual Kit
📦 1x Certificate of Conformance to NEC Codes
📦 Lead Time: 4 - 6 weeks
📍 Shipping Terms: Worldwide / Freight Delivery / LTL Palletized for Hazardous Duty Equipment
💳 Payment Options: Credit Card, PayPal, Wire Transfer, Net 30 Terms Available upon Approval
🔗 XP Climate Control Class 1 Division 2 Mini Split System (18,000 BTU/H)
🔗 Explosion-Proof Line Set Isolator & Disconnect Switch (C1D2)
🔗 Hazardous-Location Intrinsically Safe Digital Thermostat & Wall Controller
Are both the indoor and outdoor units rated for Class 1 Division 2?
Yes, the EP-MS12HP-1-2-X-(IE)-216-1Z features hazardous-location compliance for both the indoor evaporator section and the outdoor condensing unit (Groups C and D).
What refrigerant does this system use,se and what are the safety provisions?
The unit operates on high-efficiency R32 refrigerant (17.6 oz factory pre-charge) and comes with a factory-installed indoor A2L leak detection sensor to ensure complete operational safety.
Can this heat pump heat and cool in extreme outdoor conditions?
Yes, it features ultra-low-ambient heating capabilities down to -13°F (-25°C) and cooling performance up to 118°F (48°C), assisted by integrated compressor and baseboard electric heaters.
What are the electrical supply requirements?
The system operates on 208-230V / 1 Phase / 60 Hz (187–253V allowable range), powered via the outdoor unit, with a Minimum Circuit Ampacity (MCA) of 12A and Maximum Overcurrent Protection (MOCP) of 15A.
No reviews yet — be the first to review this product.