To ensure that the right VOCs are detected with the least amount of time spent out in the field, our Tiger LT Portable gas detector utilizes cutting-edge technology. Even when wearing thick gloves, the Tiger LT portable VOC gas detector is easy to use. It’s built to survive the toughest conditions thanks to its sturdy construction and removable rubber boot.
The wide, bright backlit display makes it possible to see clearly in any light. Using a built-in flashlight, the device can be used in low-light environments. When the light is dim, the illuminated keypad comes on. The Tiger VOC gas detector and the Tiger Select for total aromatic chemicals, including benzene, are two more instruments in the Tiger portable VOC gas detector line.
Features:
- ATEX Zone 0
- IECEx
- 10.6 eV Krypton PID lamp
- Ion Science patented fence electrode
- Anti Contamination System
- Ergonomic design
- Lithium-Ion Battery
- Push To Log
- USB connection to PC
- Large Clear Keypad
- Bright LED and Vibration Alarms
- IP65
Specifications:
Technical Specification | Value/Information |
Minimum Resolution* | 0.1 ppm |
Maximum Reading** | 5,000 ppm |
Response Time | T90 < 2 seconds |
Accuracy* | ± 5% display reading ± one digit |
Linearity* | ± 5% display reading ± one digit |
Intrinsically Safe Approvals | II 1G Ex ia IIC T4 Ga |
Tamb = – 15 °C ≤Ta ≤+45 °C (with lithium ion battery pack) Tamb = – 15 °C ≤Ta ≤+40 °C (with alkaline battery pack) ITS09ATEX26890X IECEx ITS 10.0036X | |
3193491 conforms to UL Std. 913, 61010-1 & | |
Certified to CAN/CSA Std. C22.2 No. 61010-1. | |
Class 1 Division 1. Approval for Groups A, B, C & D, T4 | |
Battery Life | Li-ion: life up to 24 hours continual use |
Li-ion: life up to 24 hours continual use | 10.6 eV Krypton PID lamp |
Data Logging | Push-to-log, 128 zones, 80,000 data points |
Calibration | Standard calibration 100 ppm isobutylene |
Custom calibration capability | |
Alarm | Flashing LED and 95 dBA at 300mm (12”) audible sounder |
Selectable vibrating alarm | |
Flow Rate | ≥ 220 ml/min in ambient conditions |
Temperature | Operating: -20 to 60 °C, -4 to 140 °F (non-Intrinsically Safe) |
Humidity: 0-99% RH (non condensing) | |
Protection | Designed to IP65 (heavy rain) |
1180 | |
EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A | |
Weight & Dimensions | 367 mm height (14.45”) 89 mm Width (3.54”) 60mm Depth (2.36”) |
Instrument weight 0.72 kg (1.56lb) | |
All specifications are against isobutylene calibration at 20 °C, 90% RH and up to 3000 ppm unless otherwise stated. *Gas dependent. |
Certifications:
Resources:
- Brochure
- Brochure Catalog
- Manual
- MSDS Sheet Isobutylene Gas
- MSDS Sheet Alumina Powder
- Customer Case Studies
archeal –
This amazing instrument, is easy to use and easy to calibrate. It also offer one-handed operation even when wearing the thickest of gloves. Certified ATEX Zone 0, IECEx use in hazardous areas.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Anaid Cardenas –
Could you send this equipment to Mexico City?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal