Explosion Proof Air Conditioners
ATEXXO Explosion Proof Air Conditioner – ATEX Zone 2 - Split Units - 24,000 BTU / Hr
$16,515.06Available
Your Global Authority In Hazardous Areas
Your Global Authority In Hazardous Areas
Your cart is empty.
Engineered for volatile environments, the XP Climate Control EP-MS24HP-2-1-X-(1)-216-1Z is a 24,000 BTU explosion-proof ductless mini-split heat pump certified for Class II, Division 1 (Groups E, F, G) hazardous locations. Featuring high-efficiency DC inverter technology and anti-corrosive blue-fin protection, it delivers reliable climate control and low-ambient operation for offshore platforms, refineries, and chemical processing facilities. The indoor unit is certified, while the outdoor unit is designed for non-hazardous areas.
| Country of Origin | United States (US) |
| Certification | Class II, Division 1, Groups E, F, and G |
The XP Climate Control EP-MS24HP-2-1-X-(1)-216-1Z is an industrial-grade, single-zone ductless mini-split heat pump engineered to deliver 24,000 BTU/h of precision heating and cooling in combustible and hazardous environments. Designed specifically for interior Class II, Division 1 (Groups E, F, and G) installations, this unit provides safe climate management where conductive, explosive, or combustible dusts—such as metal powders, carbon black, coal, and grain dust—are continuously or intermittently present in the air.
Built with G20 DC inverter technology, this unit optimizes energy efficiency (19.0 SEER2 / 11.9 EER2) while maintaining ultra-low frequency torque control and reliable operation down to 0°F in cooling and -13°F in heating modes. Designed for heavy-duty field use, it includes a factory-installed explosion-proof fan motor with overload protection, an integrated A2L leak detection sensor, anti-corrosive blue-fin coils tested for 500 hours of salt spray, and an LCD wireless remote with intuitive modes for seamless climate control in rugged industrial shelters.
✅ Interior Certification: Class II, Division 1, Groups E, F, and G (Certificate of Conformance NEC)
✅ High-Efficiency G20 DC Inverter Technology with Power Factor Correction
✅ 500-Hour Salt Spray Tested Anti-Corrosive Acrylic-Resin Blue Coated Coils (Indoor & Outdoor)
✅ Built-in Wi-Fi Interface & Wired Controller Capability
✅ Factory-Installed Indoor A2L Refrigerant Leak Detection Sensor
✅ Explosion-Proof Motor and Overload Protection Installed
✅ Electric Basepan and Compressor Heaters for Low-Ambient Heating Down to -13°F
✅ Self-Diagnosis, Memory/Power Failure Recovery, and Intelligent Defrosting/Preheating
✅ 6-Speed Crossflow Indoor Fan with Multi-Angle Auto Swing and Dry Anti-Mildew (X-Fan) Mode
🔹 Standard System: Wall-Mounted Indoor Evaporator. Outdoor Condensing (208-230V / 1PH / 60Hz)
🔹 Control Package: Wireless Remote Controller with LCD Display + Optional Wired Wall Controller Interface
| Feature | Details |
|---|---|
| Model Number | EP-MS24HP-2-1-X-(1)-216-1Z |
| Hazardous Certification (Interior) | Class II, Division 1, Groups E, F, G |
| System Type | Ductless Mini Split Heat Pump |
| Rated Cooling Capacity | 24,000 BTU/h (Min-Max: 5,800 – 26,270 BTU/h) |
| Rated Heating Capacity | 24,000 BTU/h @ 47°F (Min-Max: 5,400 – 26,600 BTU/h) |
| Low-Temp Heating Performance | 19,200 BTU/h @ 17°F; 15,700 BTU/h @ 5°F (COP: 1.75 @ 5°F) |
| Efficiency Ratings | 19.0 SEER2 / 11.9 EER2 / 8.5 HSPF2 |
| Cooling Operating Range | 0°F to 118°F |
| Heating Operating Range | -13°F to 75°F |
| Refrigerant Type & Factory Charge | R32 / 42.3 oz (Pre-charged for 25 ft) |
| Indoor Leak Detection | Factory-installed A2L leak detection sensor |
| Indoor Unit Dimensions (W x H x D) | 49-9/16" x 13-7/64" x 9-11/16" |
| Indoor Unit Weight (Net / Gross) | 45.1 lbs / 51.7 lbs |
| Indoor Airflow (Min - Max) | 412 – 677 CFM |
| Indoor Sound Pressure Level | 36 – 51 dB(A) |
| Outdoor Unit Dimensions (W x H x D) | 37-23/32" x 25-63/64" x 15-53/64" |
| Outdoor Unit Weight (Net / Gross) | 93.7 lbs / 103.6 lbs |
| Outdoor Compressor Type | GREE G20 / Single Cylinder / 1-Stage Inverter |
| Coil Protection | Copper Tube / Aluminum Fin with Acrylic-Resin Blue Coating (500-hr salt spray tested) |
| Power Supply | 208-230V / 1-Phase / 60Hz (Powered at outdoor unit) |
| Voltage Operating Range | 187 VAC – 253 VAC |
| Rated Current | 11.0 A (Cooling) / 12.0 A (Heating) |
| MCA / MOCP | MCA: 15 A / MOCP: 20 A |
| Piping Connections (Liquid - Gas) | 1/4" Liquid - 1/2" Gas (Flared) |
| Refrigerant Line Limits | 10 ft min to 131 ft max length / 82 ft max elevation |
| Wiring Requirements | Main: Per local code; Interconnecting: 14/4 AWG |
🔗 NEC Class II, Division 1 (Groups E, F, G)
🔗 Certificate of Conformance to NEC Codes
🔗 ASTM B117 (500-Hour Salt Spray) – Corrosion-resistant acrylic-resin blue fin coating protecting coils
🔗 Low Ambient Protection – Factory-installed compressor and basepan heaters for severe-temperature operation
🔗 Download Datasheet
🔹 Oil & Gas (Offshore Platforms, Refineries, Fuel Storage, and Metering Shelters)
🔹 Chemical Plants & Agricultural Processing (Grain Elevators, Flour Mills, and Starch Plants)
🔹 Mining & Coal Handling Facilities (Conveyor Sheds, Pulverizing Rooms, and MCC Buildings)
🔹 Labs & Battery Storage Facilities
🔹 Manufacturing (Munitions Plants, Powder Coating, and Metal Dust Fabrication Facilities)
📦 1x Indoor Wall-Mounted Evaporator Unit (Class II, Div 1 Rated)
📦 1x Outdoor Condensing Unit
📦 1x Wireless Remote Controller with LCD Display
📦 1x Factory-Installed A2L Leak Detection Sensor
📦 1x Built-In Explosion-Proof Motor & Overload Assembly
📦 1x Owners & Maintenance Documentation Kit
📦 Lead Time: 4 - 6 weeks
📍 Shipping Terms: Worldwide / Freight Delivery / Dedicated Hazardous Equipment Logistics
💳 Payment Options: Credit Card, Wire Transfer, Net 30 Terms Available Upon Approval
🔗 XP Climate Control C1D2 Wall-Mount Mini Split Systems
🔗 Hazardous Area Explosion-Proof Thermostats & Wired Controllers
🔗 Class I, Division 1 / Division 2 Explosion-Proof Industrial HVAC Units
What hazardous environment is this mini-split certified for?
The indoor evaporator unit is engineered and certified for interior Class II, Division 1, Groups E, F, and G locations, making it safe for atmospheres containing combustible metal dusts, carbon black, coal dust, and grain dust.
Can this system heat and cool in extreme outdoor temperatures?
Yes. The system features low-ambient cooling down to 0°F (-18°C) and heating down to -13°F (-25°C), supported by factory-installed electric baseboard and compressor heaters.
What refrigerant does this system use?
It uses environmentally friendly R32 refrigerant and comes equipped with a factory-installed indoor A2L refrigerant leak detection sensor for added field safety.
How is the unit powered?
The entire system runs on a single-phase 208–230V / 60Hz circuit supplied directly to the outdoor unit (MCA: 15A, MOCP: 20A), with an interconnecting 14/4 AWG cable feeding power and control to the indoor unit.
No reviews yet — be the first to review this product.
