LED Linear Light that Is Intrinsically Safe NICOR – XPL1A080U50GR Proteus is intended for use in environments prone to dampness, filth, corrosion, and vibration. Proteus fixtures are available in Class 1 Division 1 in 40W with a two-foot length or 80W with a four-foot length for use in situations deemed hazardous by the presence of combustible vapors or gases as specified by the NEC. The Proteus Series is perfect for retrofitting existing HPS/MH & FL systems since it provides increased efficacy, cheaper maintenance costs, and shorter payback periods.
Features
- Class I Division 1, Group C, D
- Class I Division 2, Group A, B, C, D
- 80 Watt LED Linear
- 100-240/277 VAC
- 5000K
- Housing: Die-Cast Aluminum *Copper Free
- Polyester Powder Coat Finish
- Lens: Tempered Glass
- Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
- 5-year limited system warranty standardNote: Warranty does not cover product failure due to an overvoltage event or power surge
Construction
- Heavy-duty die-cast copper-free aluminum housing
- Stainless steel hardware
- 3/4″ NPT threaded conduit wires access ports
- Weight – 2’: 16.1 lbs; 4’: 23.8 lbs
- RoHS Compliant
- Captive bolts on power supply cover
Optical System
- A heavy-duty tempered glass lens creates uniform light distribution and maximizes lumen output
- Diffused lens optional**
- CCT: 5000K, 3000K**, or 4000K**
- CRI: 70+
Electrical
- Input voltage of 100-240/277VAC or 347-480VAC**
- The input frequency of 50/60Hz
- Power Factor of ≥.95
- THD <20%
- 10kA surge protector
- Reported L70 hours >50,000
Environmental
- Ambient Operating Temperature -40°F (-40°C) ~ 140°F (60°C)
- C1D1 T6 at 140°F (60°C)
- C1D2 T3C at 140°F (60°C)
- Ambient Operating Humidity of 10%~90% RH
Finish
- RAL 7037 Dusty Gray polyester powder coat
Installation
- Prewired with 2’ flying leads
- Allows wiring without opening the power supply cover
- Integrated 3/4” NPT threaded hub for pendant mount
- Universal trunnion bracket available, with legacy bolt pattern (drill rigs)
- Pipe mount kit available
- For installations where power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel
Warranty
- 5-year limited system warranty standard
- The warranty does not cover product failure due to an overvoltage event (power surge)
Specifications
| Primary Component Material | Die-Cast Aluminum (Copper Free) |
| Product Color | Dusty Gray |
| Finish | Polyester Powder Coat |
| Product Length (in) | 43.3 |
| Voltage | 100-240/277VAC |
| Wattage | 80.8 |
| Lumen Output | 9160 |
| Lumens Per Watt | 113.4 |
| Color Temperature (CCT) | 5000K |
| CRI | >70 |
| Beam Angle | 120° (+/- 10%) |
| Spacing Criteria | 1.34 |
| 120V Current (A) | 0.67 |
| 277V Current (A) | 0.29 |
| Power Factor | ≥.95 |
| Total Harmonic Distortion (%) | <20% |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
| Product Lifespan (Hours) | >50,000 |
| Warranty (Years) | 5 |
Resources:
- Brochure
- Certification Spec Sheet
- Certifications Features and Benefits
- Proteus Installation Instructions
More Options For you:
- NICOR – XPQ1B150U50GRP Titan LED Flood Light 150 Watt LED
- NICOR – XPR1B065U50GRM Eres Multi-Mount LED Area Light 65 Watt
Offshore RigMan88 –
Hands-down to this amazing LED linear. The entire make and design of this product is top-notch. The die-cast copper-free aluminum housing is very solid, it doesn’t break apart so easily. Note: this liner can withstand temperature as low as -40°C up to 60°C so whether you are in the freezing cold or inside a high-temperature room, you know this thing won’t disappoint you.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal