NICOR-XPL1B040U50GREM Proteus 40W LED Emergency Light
NICOR-XPL1B040U50GREM Proteus 40W LED Emergency Light is a hazardous site LED Emergency lighting model may be used in environments where moisture, dust and corrosion are a problem. Approved for use in applications where abnormal circumstances and places where combustible dust, fibers and flyings are present as stated by the National Electrical Code (NEC) are present. Proteus fixtures is available in class C1D2 in 40W with a two-foot length. For retrofitting existing HPS/MH & FL and fluorescent lighting systems, the Proteus series provides energy and maintenance reductions that result in a very easy payback.
Features
Certifications:
- Class I Division 2, Group A, B, C, D: Indicates the product is suitable for use in hazardous locations where flammable gases or vapors may be present under abnormal conditions.
- Class II Division 1, Group E, F, G: Indicates suitability for locations where combustible dust may be present.
- Class III: Specifies suitability for areas with easily ignitable fibers or flying particles.
- UL 844 Hazardous Location: Certification for luminaires used in hazardous locations.
- UL 1598 Wet Location: Certification for fixtures designed to withstand exposure to wet conditions.
- UL 1598A Marine: Certification for fixtures suitable for marine environments.
- UL 8750 LED Safety: Indicates compliance with safety standards for LED equipment.
Ingress Protection:
- IP 66 Rated: Signifies protection against dust and strong jets of water.
Construction:
- Housing: Die-Cast Aluminum (Copper Free): Indicates the material used for the housing, and the absence of copper to prevent sparking in hazardous environments.
- 40 Watts: Power consumption of the fixture.
- 100-240/277 VAC: Input voltage range.
- Polyester Powder Coat Finish: A durable finish to protect the fixture from environmental elements.
- Lens: Polycarbonate – The material used for the lens.
- Meets FCC Part 15, Subpart B, Class B standards: Compliance with electromagnetic interference standards.
Optical System:
- Anodized aluminum reflector assembly with polycarbonate lens
- CCT: 4000K
- CRI: 70+
Electrical:
- Input voltage of 240/277VAC
- The input frequency of 50/60Hz
- Power Factor of ≥.95
- THD <20%
- 10kA surge protector
- Reported L70 hours >50,000
Environmental:
- Ambient Operating Temperature 32°F to 122°F (0°C to 50°C
- C1D2 T3C at 122°F (50°C)
- C2D1 T4A at 122°F (50°C)
- Ambient Operating Humidity of 10%~90% RH
EM Battery Backup:
- 12W Output Power
- 24-Hour charge time
- 90-minute emergency run time
Finish:
- RAL 7037 (Dusty Gray) polyester powder coat
Installation:
- Prewired with 2’ flying leads
- Allows wiring without opening the power supply cover
- Integrated 3/4” NPT threaded hub for pendant mount
- Universal trunnion bracket available, with legacy bolt pattern (drill rigs)
- Pipe mount kit available
- For installations where power surge may be possible, NICOR recommends installing additional surge
- protection at the electrical distribution panel
Warranty:
- 5-year limited system warranty standard
- Warranty does not cover product failure due to an overvoltage event (power surge)
Specifications
| Primary Component Material | Die-Cast Aluminum (Copper Free) |
| Product Color | Dusty Gray |
| Finish | Polyester Powder Coat |
| Product Length (in) | 23.6 |
| Fixture Height (in) | 8.1 |
| Voltage | 120-277VAC |
| Wattage | 40.9 |
| Lumen Output | 5533 |
| Lumens Per Watt | 135.3 |
| Color Temperature (CCT) | 5000K |
| CRI | 72 |
| Beam Angle | 120° (+/- 10%) |
| Spacing Criteria | 1.46 |
| 120V Current (A) | 0.341 |
| 277V Current (A) | 0.148 |
| Power Factor | ≥.95 |
| Total Harmonic Distortion (%) | less than 20% |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Product Lifespan (Hours) | greater than 50,000 |
| Warranty (Years) | 5 |
What others are saying
There are no contributions yet.