Features:
- Class I Division 2
- Floor mounted electrically heat traced emergency eyewash station with bottom inlet
- Electric heat-traced stations prevent freezing even in extreme conditions
- Units are intended for cold weather use down to -40°F
- Self-regulated with external termination guards
- The thermostat activates when the internal piping temperature falls below 75°F.
- Requires 120 VAC single phase power supply
- UV-resistant orange ABS plastic with polyethylene foam insulation
- 10” diameter orange ABS plastic with 20 GPM flow control
- US-made with brass ball and PTFE seals
Application: Electric heat-traced stations prevent freezing even in extreme conditions. Thermostat-regulated units are heated by a self-limiting heat-tracing cable wrapped around the internal pipe. Units are intended for cold weather use down to -40°F. See ‘Tempering Valves’ section to ensure tepid water compliance with ANSI Z358.1-2014.
Heating Cable: Self-regulated with external termination guards. The thermostat activates when the internal piping temperature falls below 75°F. FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D.
Electrical System: The unit is fully wired at the factory. Junction box and components rated for Class I, Division 2, Groups B, C, and D. Requires 120 VAC single-phase power supply.
Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections are secured with removable stainless steel screws for easy maintenance.
Shower Head: 10” diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1” IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 29” stainless steel pulls rod.
Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control.
Eyewash Valve: 1/2” IPS brass three-way self-draining stay-open ball valve. US-made with brass ball and PTFE seals. Includes 1/2” NPT port to drain water from spray heads after use.
Pipe And Fittings: Schedule 40 galvanized steel.
Supply: 1-1/4” NPT female bottom inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.
Shipping: For this specialized unit, expect lead time to be around 6-7 weeks
Offshore RigMan88 –
Came at the time we really need it. It is below freezing in where we work at and this equipment has saved us in many situations. This GFR3110 from Guardian Equipment is highly engineered and very reliable for Class 1 Division 2 use.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal