Features:

• Class I Division 2
• Heated Safety Station with Eyewash, IEEE compliant and bottom inlet
• IEEE compliant heat-traced station includes a control panel with a single-point connection for electrical components
• Single point connection for electrical components
• Self-regulated with external termination guards
• Unit is fully wired at the factory
• UV-resistant orange ABS plastic with polyethylene foam insulation
• 10” diameter orange ABS plastic with 20 GPM flow control.
• Freeze-resistant with float-off dust covers and internal flow control.

Application: IEEE compliant heat-traced station includes a control panel with a single-point connection for electrical components. Thermostat-regulated units are heated by a self-limiting heat-tracing cable wrapped around the internal pipe. Units prevent freezing in extreme conditions down to -40º F. See ‘Tempering Valves’ section to ensure tepid water compliance with ANSI Z358.1-2014. Compliant with IEEE standard 515-2011.

Control Panel: Single point connection for electrical components. Includes power indicator light, heat trace indicator light, and high/low-temperature warning lights. The panel includes dry contacts to signal power failure or high/low-temperature warnings. The panel also includes dry contacts to signal an event when alarm options are installed. UL listed NEMA 4X approved for Class I, Division 2, Groups B, C, and D.

Heating Cable: Self-regulated with external termination guards. The heating cable activates when the internal piping temperature falls below 75°F. FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D.

Electrical System: The unit is fully wired at the factory. Junction box and components rated for Class I, Division 2, Groups B, C, and D. Requires 120 VAC single-phase power supply.

Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections are secured with removable stainless steel screws for easy maintenance.

Shower Head: 10” diameter orange ABS plastic with 20 GPM flow control.

Shower Valve: 1″ IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 29″ stainless steel pulls rod.

Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control.

Eyewash Valve: 1/2″ IPS brass three-way self-draining stay-open ball valve. US-made with brass ball and PTFE seals. Includes 1/2″ NPT female port to drain water from spray heads after use.

Pipe And Fittings: Schedule 40 galvanized steel.

Supply: 1-1/4″ NPT female top inlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.

Shipping: For this specialized unit, expect lead time to be around 6-7 weeks

Resources:

• User Manual
• Operation and Maintenance Guide
• Written Specs

More Options For You:

• GFR 3500 – Guardian Equipment Eyewash Station
• GFR3510 – Guardian Equipment Eyewash Station
• GFR3300 – Guardian Equipment Eyewash Station
• GFR3200 – Guardian Equipment Eyewash Station
• GFR3110 – Guardian Equipment Eyewash Station