It is now possible to use Ion Science Falco, an intrinsically safe fixed VOC detector, in hazardous areas. IECEx certification is a guarantee of quality. Fixed VOC Detectors with “typhoon” technology is developed for extreme weather conditions and condensing atmospheres, respectively.
Falco is a new generation of fixed VOC detectors that use patented photoionization detection (PID) technology to continuously detect a wide range of volatile organic compounds (VOCs). The novel ‘typhoon technology,’ exclusive to this stationary VOC detector, protects the PID sensor from condensing moisture for increased resiliency under extreme weather situations. The proprietary Fence Electrode Technology in the PID sensor essentially eliminates the effects of airborne humidity and safeguards against contamination.
A straightforward user interface is one of the numerous benefits of the Falco stationary VOC detector. An OLED screen with great contrast and a graphical user interface makes it easy to set up and service. It features five magnetic switches. RS485 (Modbus®), 4-20 mA, and Relay outputs are also included as standard equipment on all units. It is possible to configure the Relay outputs for high and low alarms, fault circumstances, or test cycle synchronization.
Features:
- ATEX Zone 1
- IECEx
- 10.6 eV lamp
- Sensor Housing
- Typhoon Technology
- Status Indicator
- OLED Screen
- 5 Switches
- Switch Confirm
- RS 485 (Modbus)
- 4 – 20mA current loop
- Programmable relays (x2)
Specification:
| Technical Specification | Value/Information |
| Sensor | Photoionisation with 10.6 eV lamp |
| Detection ranges and sensitivity | 10.0 ppm* 0.001 ppm |
| 50.0 ppm* 0.01 ppm | |
| 1000 ppm* 0.1 ppm | |
| 3000 ppm* 1 ppm | |
| Detection time (T90) | <30 seconds (diffused)** |
| User interface | Display: OLED high contrast white on black: 128 (w) x 64 (h) pixels Screen size: 35 mm (w) x 17.5 mm (h) |
| 5 magnetic switches with LED confirmation (up, down, left, right & enter). Magnetic actuator supplied. | |
| Status indicator | Bright visible status indicator: RED, AMBER, GREEN |
| Certification | II 2G Ex d ib IIC T4 Gb ISO9001:2015 |
| Environmental specification | Diffused |
| Op Temp: -40oC to +50oC | |
| Storage Temp: -40oC to +60oC | |
| Pumped | |
| Op Temp: -20oC to +50oC | |
| Storage Temp: -20oC to +60oC | |
| 0-100% RH and condensing humidity | |
| Mechanical interface | 2 x cable entry points with 3/4” NPT threads (left and right) |
| 2 x 3/4” NPT to M20 Stainless steel (supplied) | |
| Dimensions | Without pump: 200 (h) x 190 (w) x 125 (d) mm |
| With pump: 290 (h) x 190 (w) x 125 (d) mm | |
| Mounting points | 2 x M8 |
| Input power | Working voltage: 12 to 40 Vdc Max. power: 7 watts |
| Outputs | 4 to 20 mA (active and passive) |
| RS485 supports Modbus® protocol | |
| Relay x 2 SPST (60 Vdc 2A) – configurable | |
| * Based on Isobutylene gas | |
| ** When set to continuous measurement | |
| Modbus® is a registered trademark of Schneider Electric |
Certifications:
Resources:
- Brochure Catalog
- Brochure
- Diffused User Manual
- Pumped User Manual
- Gamma Alumina MSDS Sheet
- Isobutylene MSDS Sheet
More Options For You:
archeal –
Amazing device that is available either diffused and pumped models. I also admire the large panel of LED that allows the status to be seen in the distance even in sunlight. Certified ATEX Zone 1 and IECEx.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal