NICOR - Eres CID2 XPR1B045H50GRM

The Eres Hazardous Location LED Area Light is intended for use in locations that may contain moisture, filth, dust, corrosion, and vibration, as well as NEMA 3 and 4X locations that may experience wind, water, snow, or a high ambient temperature. For use in sites deemed hazardous by the NEC due to the presence of flammable vapors, fumes, or combustible dust. Eres luminaires are offered in 45W class C1D2 configurations. The Eres is perfect for retrofitting existing HPS/MH systems, as it provides increased efficacy, fewer maintenance costs, and a shorter payback period. This is the multi-mount option.

Features:

• Class I Division 2, Group A, B, C, D
• Class II Division 1, Group E, F, G
• Class II Division 2, Group F, G
• Class III
• UL 844 Hazardous Location
• UL 1598 Wet Locations
• UL 1598 A, Marine
• UL 8750 LED Safety
• IP 66 Rated
• Pendant Mount
• DLC Certified* (5000K only)
• CSA C22.2 No. 250.0-08, 250.13
• IECEx
• Color: Dusty Gray
• Polyester Powder Coat Finish
• Housing: Die-Cast Aluminum (CopTempered Glassper Free)
• Lens: Tempered Glass
• Voltage: 100-240/277 VAC
• Operating Temperature: -40°F to 131°F (-40°C to 55°C)
• 10kA surge protector
• Meets FCC Part 15, Subpart B, Class B standards for conducted and radiated emissions

Construction

• Die-cast, copper-free aluminum housing
• Chimney-type structure design improves heat dissipation, increasing the lifespan
• Stainless steel hardware
• Weight - 10.8 lbs
• 3/4” NPT threaded conduit/wire access port or multi-mount attachment points
• RoHS Compliant

Optical System

• Tempered glass creates uniform light distribution and maximizes lumen output
• Diffused lens optional**
• CCT: 5000K
• CRI: 70+

Electrical

• Input voltage of 100-240/277VAC or 347-480VAC (45W only)**
• The input frequency of 50/60Hz
• Power Factor of ≥.95
• THD <20%
• 10kA surge protector
• Reported L70 hours >50,000

Environmental

• Ambient Operating Temperature -40°F (-40°C) ~ 131°F (55°C)
• C1D2 T4A at 131°F (55°C)
• C2D1 T5 at 131°F (55°C)
• C2D2 T5 at 131°F (55°C)
• Ambient Operating Humidity of 10%~90% RH

Finish

• RAL 7037 (Dusty Gray) polyester powder coat

Installation

• Mounting Options Include:
• Multi-mount and associated accessories
• Adjustable trunnion bracket for ceiling, wall, etc.
• Multi Mount Options (3/4” NPT)
• For installations where a power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel

Warranty

• 5-year limited system warranty standard
• The warranty does not cover product failure due to an overvoltage event (power surge)

Specifications:

Primary Component Material	Die-Cast Aluminum (Copper Free)
Product Color	Dusty Gray
Finish	Polyester Powder Coat
Product Length (in)	10.2
Voltage	100-240/277VAC
Wattage	65.1
Lumen Output	9892
Lumens Per Watt	152
Color Temperature (CCT)	5000K
CRI	73
Beam Angle	114.2°
Spacing Criteria	1.32
120V Current (A)	0.543
277V Current (A)	0.235
Power Factor	≥.95
Total Harmonic Distortion (%)	less than 20%
Operating Temperature	-40°F to 131°F (-40°C to 55°C)
Product Lifespan (Hours)	greater than 50,000
Warranty (Years)	5

Certifications:

• Equipment Certification Requirements

 Other Resources:

• Specifications Sheet
• Brochure
• Installation Instructions