The AMZ-HD42-1 from IVC is a fixed HD video camera with a motorized 4x zoom. The camera is approved for use in areas classified as Class I Division 1 and is enclosed in a 316L stainless steel casing. This IP camera system has an 802.11a/b/g/n wireless radio.
IVC’s approved fixed and pan-tilt-zoom cameras are designed and produced in the United States. These items have been tested and approved for usage in hazardous locations. AMZ products are fixed high-definition cameras with aluminum or stainless-steel casings. 360o pan and 180o tilt functions are standard on IVC’s APTZ HD stainless steel cameras. Analog and IP cameras are offered in the X-Series. All cameras are compatible with IVC’s video management software, which enables camera configuration and viewing from a remote location. Additionally, this program may be used to integrate video into DCS or SCADA systems.
Features:
- Class I Division 1
- ATEX Zone 1
- Wireless
- 1080p IP video
- 4x motorized zoom
- Stainless steel enclosure
- H.264, MJPEG
- The voltage required: 110 VAC
- 30 Frames Per Second for smooth video
- Wide dynamic range
- Certified for use in hazardous areas
Specifications:
| Imager | 1/2.8” Progressive Scan CMOS |
| Resolution | 1920 x 1080 |
| Shutter | 1/10 to 1/10,000 Seconds (manual) |
| Minimum Illumination | 0.15 lux (Color) 0.09 lux (B/W) 0 lux to 15m with LEDs |
| WDR | On/Off/Auto |
| Image Features | Auto Exposure, Auto White Balance, Auto and Manual Iris, Back Light Compensation |
| Focus | Auto |
| Zoom Ratio | 4x Optical Zoom |
| View Angle | 30.8° - 103° |
| Focal Length | 2.8 – 12 mm |
| F-number | 1.4 |
| Network | 802.11b/g/n or 802.11a/n, 2412 - 2472 MHz: 17dBm, 5180 - 5825 MHz: 17dBm, 802.1x, 64/128-bit WEP, WPA, WPA2, 802.11i |
| Frame Rate | 30 FPS |
| Compression | H.264, MJPEG |
| Protocols | TCP/IP, HTTP, FTP, SMTP |
| Weight | 10.2 lbs. |
| Voltage Required | (See ordering information) |
| Power Consumption | 15 W max. |
| Operating Temperature | -29° to 60° C |
| Storage Temperature | -35° to 65° C |
| Dimensions | 5.50” H x 5.50” W x 8” D |
| Mount | Wall Mount Standard |
| Protection Class | NEMA Type 4x, IP66 |
| Regulatory Approvals | |
| Safety | UL STD 61010-1 + UL1203 CSA STD CSA22.2 No.30 + No. 25 EN 60079-0:2012, EN 60079-1:2007, EN 60079-31:2009. ATEX 94/9/EC. |
| Hazardous Area | |
| Class I Groups B, C & D, Class II Groups E, F & G, Class III Type 4x Class I Zone 1 AEx d IIC Ex d IIC IEC 60529, T6 |
What others are saying
There are no contributions yet.