Explosion Proof Fan Canarm SD10-XPF – 10″ Inch Fan Size
- Class 1 Group C
- Class 1 Group D
- Class II Group F
- Class II Group G
- 10 Inch Fan Size
- 13″ X 13″ Framing Dimensions
- Single Speed
- Weighs 44 lbs.
- 1/3 horse power
- Totally enclosed, ball bearing motor with thermal overload protection.
- The fan blades are well-balanced, heavy gauge aluminum.
- The rugged steel welded box housing has a durable powder coated finish.
- Aluminum louver shutters are supported by long life nylon bushings.
- Heavy wire chrome plated OSHA guards on intake side of fan.
- All fans are shipped completely assembled.
Canarm explosion proof fans follow a tradition of quality in design, materials and construction. Using our quality “Standard Fan” housing and motor mount as the basis for design, we have developed an efficient, economically priced explosion proof fan. All Explosion Proof Fans have a single speed and dual voltage explosion proof motor.
Canarm SD010-XPF meets all the standards listed below:
Class I, Group C – Atmospheres containing ethyl ether, ethylene, gases or vapors of equivalent hazard.
Class I, Group D – Atmospheres such as acetone, ammonia, benzene, butane, cyclopropane, ethanol, gasoline, hexane, methane, natural gas, naphtha, propane, or gasses or vapors of equivalent hazard.
Class II Group F – Atmospheres containing carbonaceous dust, including carbon black, charcoal, coal, or coke dusts that have more than 8% total entrapped volatiles, or dusts that have been sensitized by other materials so that they present an explosion hazard.
Class II Group G – Atmospheres containing combustible dusts not included in group E or F, including flour, grain, wood, plastic and chemicals.
Dimensions:
| FAN SIZE | A X A SQUARE | B | C | D c/c | E | N |
| 8" | 13 1/4" | 17 1/2" | 4" | 12" | 10 3/4" | 2 |
| 10" | 15 1/4" | 17 1/2" | 4" | 14" | 12 3/4" | 2 |
| 12" | 17 1/4" | 20 1/2" | 6" | 16" | 14 3/4" | 3 |
| 18" | 23 1/4" | 20 1/2" | 6" | 22" | 20 3/4" | 4 |
| 24" | 29 1/4" | 20 1/2" | 6" | 28" | 26 3/4" | 5 |
Specifications:
| MODEL | FAN SIZE | HP | AMPS | RPM | 0" SP | .05" SP | .10" SP | .25" SP | FRAMING | WEIGHT |
| SD08-XPF | 8" | 1/3 | 6.6/3.3 | 1625 | 320 | 280 | 240 | - | 11" X 11" | 38 |
| SD10-XPF | 10" | 1/3 | 6.6/3.3 | 1625 | 620 | 575 | 530 | - | 13" X 13" | 39 |
| SD12-XPF | 12" | 1/3 | 6.6/3.3 | 1625 | 1640 | 1600 | 1540 | 1390 | 15" x 15" | 42 |
| SD18-XPF | 18" | 1/3 | 6.6/3.3 | 1625 | 3200 | 3150 | 3090 | 2920 | 21" x 21" | 60 |
| SD24-XPF | 24" | 1/3 | 6.6/3.3 | 1625 | 5500 | 5400 | 5310 | 5100 | 27" x 27" | 72 |
NOTE: RPM Min (minimum) is determined when louvres are opened one inch
NOTE: Wind has a significant effect on exhaust fans. A 10 mph wind creates a 0.05” pressure gainst the fan. A 20 mph wind creates 0.20” pressure and 30 mph a 0.45” pressure. These pressures are in addition to the static pressure in the building. Wind blocks or hoods should be included in all designs where fans will be subjected to winds above 10 mph.
Offshore RigMan88 –
A well-constructed fan with so much power and capacity. I am impressed with how much this fan can blow air and keep up with the long hours of use, 16 hours a day. Very solid construction, the rugged steel welded box housing has a durable powder coated finish. Class 1 Group C certified
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal