Extronics iSCAN301S combines the latest 1D and 2D image code reader technology with a rugged, ATEX Zone 1/2 and 21/22 certified fixed barcode scanner ideal for usage in hazardous locations. Approved by IECEx. The iSCAN301S is wall-mountable, and configuration is a breeze with the accompanying software. Integrated lighting enables reliable and accurate code reading in low-light environments, and a choice of interfaces enables rapid implementation with broad compatibility.
Features:
- ATEX Zone 1/2
- ATEX Zone 21/22
- IECEx
- 1D and 2D Image Code Reader 40 to 1,500 mm read distance (ICR620S)
- Range of interfaces for wide compatibility
- Accurate and reliable
- -20ºC to +55ºC
- Fully rugged IP66
Benefits
Highly reliable
- The iSCAN301 uses a physical trigger input function, rather than a code trigger function. This increases the reliability of first time transfer on both stationary and moving objects.
Reads curved objects
- Powerful integrated, controllable LED illumination means that curved objects can be homogenously lit and codes read clearly, without the need for an external light source.
Simple configuration
- Easy to configure via the Ethernet interface. The live image output makes it easy to align and set up in the field.
Serial Interface
- The scanned barcode is output over the RS232 interface.
Advanced accuracy
- The iSCAN301 has a high read rate even with difficult low contrast or poorly printed codes. This makes it ideal for DPM (Direct Print Marking) applications.
Specifications
Certification | Ex II 2 G Ex d IIC T5 or T6 Gb |
Ex II 2 D Ex tb IIIC T85°C or T100°C Db, IP66 | |
Dimensions | H224 x W224 x D152 mm (including mounting flanges) |
Mounting centres 198 x 198 mm (11mm diameter) | |
Weight | Approx. 5.5kg |
Ingress protection | IP66 |
Enclosure material | Grade LM6 Cast Alloy Epoxy Coated |
Ambient operating temperature | -20°C to +55°C |
Humidity | 90 %, non condensing |
Ambient light resistance | 2,000 lx |
Image recording rate | 60 Hz at 752px x 480px (WVGA resolution) |
Light source | Illumination LEDs: |
Visible red light (λ= 617 ± 15nm) | |
Visible blue light (λ= 470 ± 15nm) | |
Electrical connection | 21x AKZ 2.5 terminals for component cores for power and data |
Mechanical connection | 2 off M20 cable entries in bottom face |
Cable glands quoted upon request (Cable spec required) | |
Host data interface | Serial: RS232 or RS422 300baud to 115.2 Kbaud |
CAN: 20kbit/s to 1Mbit/s | |
Configuration port | Ethernet: 10/100 Mbit/s |
Operating voltage | 10 – 30V |
Power consumption | Max. 3W |
Code qualification | ISO/IEC 16022, ISO/IEC 15415, ISO/IEC 18004, ISO TR 29158/AIM DPM |
Scanning operation | Laser can operate as always on or via control signal. |
Control signal can be hardware or a software trigger. | |
Client to configure - refer to user manual. |
What others are saying
There are no contributions yet.