Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN

• ATEX Zone 1/21
• Class I Division I
• Class II Division I
• IECEx
• ATEX Apparatus Certified
• IECEx apparatus certified
• USA and Canada Listed Equipment (cQPSus)
• optimized frequency range from 700MHz to 3,9GHz & 4,6GHz to 6GHz
• N Female antenna connection suitable for N Male antenna
• 3/4'' npt-m thread connection
• Stainless steel housing
• RP-SMA Female coaxial connector suitable for RP-SMA Male radio connection
• double connector execution, no coax cable
• max RF power input 2 Watts (33dBm)
• ambient temperature range -40°C to +85°C (T5) / +70°C (T6)

Introducing the new Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN is designed to be used directly with listed explosion housings or conduit fittings. This coupler is an integrated blocking circuit prevents hazardous energy reaching the antenna if a radio, modem or access point failure occurs. It also allows antenna removal in hazardous areas.

The couplers powerful design allows for the connection to approximately any radio and antenna. It is a highly flexible cost-effective solution to hazardous area radio system deployment. The coupler can also be used as a cable bulkhead.

Solexy I S Antenna Barrier

The Antenna Coupler function is to block DC signal and provide very high impedance to low frequency AC signal.Fitting is approved for hazardous location and can be installed with a simple wrench.

Features

• Short Circuit Protection - include integrated blocking circuitry
• Environmental Protection - All required circuitry is recessed into fitting and encapsulated against harsh environment.
• Certification - The RX series is certified ATEX, IECEx and for USA and Canada as an apparatus, and can be installed per the conditions of acceptability, without further assessment. North America approval ( USA and Canada ) includes Class and Divisions and Zones. IECEx certifications is issued from an Australian noticed  body, therefore RX can be installed Queensland mine.
• No Sealing Fitting Required - Permits a wide variety of passive antennas to be installed in hazardous areas.
• Antennas may be removed and/or installed with power on.Perfect for a cable bulkhead connection.
• Isolated Antenna Ground - optional antenna ground isolation ( RX 1..) from housing ground,combined with positive circuit,solves ground loop issues in case of remote mounted antennas and prevent potential ground noise to interfere with RF signal.

Specifications

ATEX certification nr. TÜV CY 18 ATEX 0206158 X	Ex I M2 (M1) Ex db mb [ia Ma] I Mb II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T5…T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T80°C…T100°C Db
Standard Ref.	EN 60079-0, EN 60079-1, EN 60079-11, EN 60079-18, EN 60079-31
IECEx certification nr. IECEx MSC 19.0001X	Ex db mb [ia Ma] I Mb Ex db mb [ia Ga} IIA/IIB/IIC T5….T6 GbEx mb tb [ia Da] IIIC T80°….T100°C Db
Standard Ref.	IEC 60079-0, IEC 60079-1, IEC 60079-11, IEC 60079-18, IEC 60079-31
USA & Canada certification cQPSus LR-1504-3	Class I, Division 1, GROUP ABCD; Class II, Division 1, GROUP EFG [Ex ia Ga] IIC; [Ex ia Da] IIIC Class I, Zone 1, AEx db mb [ia Ga] IIA/IIB/IIC T6...T5 Gb Zone 21, AEx mb tb [ia Da] IIIC T80°C...100°C Db Ex db mb [ia Ga] IIA/IIB/IIC T6...T5 Gb Ex mb tb [ia Da] IIIC T80°C...T100°C Db
Standard Ref.	CAN/CSA C22.2 No. 60079-0 UL 60079-0 CAN/CSA C22.2 No. 60079-1 UL 60079-1 CAN/CSA C22.2 No. 60079-11 UL 60079-11 CAN/CSA C22.2 No. 60079-18 UL 60079-18 CAN/CSA C22.2 No. 60079-31 UL 60079-31 CAN/CSA C22.2 No. 60950-1 UL 60950-1 CAN/CSA C22.2 No. 25-17 UL 1203 CAN/CSA C22.2 No. 30-M1986 CAN/CSA C22.2 No 157 UL 1203 UL 508 CAN/CSA C22.2 No. 94.2-15 UL 508 NEMA 250-2014
Maximum Fault Voltage	250VDC, 250VAC 50-60Hz
Approximate Weight	0.32 kg (70.6 lb)
NEMA rating	Provides a NEMA 4X connection when connected to a NEMA 4X rated enclosure
Impedance	50 Ω
Ambient Temperature Range	-40°C (-40°F) to +85°C (+185°F) when max RF input = 2W (T5) (standard) -40°C (-40°F) to +80°C (+176°F) when max RF input = 6W (T5) (optional, consult factory) -40°C (-40°F) to +70°C (+158°F) when max RF input = 2W (T6) (standard) -40°C (-40°F) to +65°C (+149°F) when max RF input = 6W (T6) (optional, consult factory)

	Approximate Insertion Loss (dB)
Frequency	J version	R version
100 MHz	1.3	-
500 MHz	0.4	1.2
1.4 GHz	0.4	0.6
1.7 GHz	0.5	0.6
2.5 GHz	0.8	0.8
3.9 GHz	-	1.1
4.9 GHz	-	1.8
5.4 GHz	-	1.4
6.0 GHz	-	2.0

Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN Certifications:

• Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN ATEX Certificate
• Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN IECEX Certificate
• Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN QPS Certificate

Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN Other Resources:

• Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN Datasheet
• Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200JXN UL Control Drawing