Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200RXN

SKU: RX13S0200RXN
(1 customer review)

Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200RXN is ATEX Zone 1/21 and Class I Division I, Class II Division I hazardous areas certified. It is backed up with ATEX Apparatus, IECEx apparatus and the USA and Canada Listed Equipment certifications as well

With its high-tech capabilities which include blocking DC signal and providing a very high impedance to low-frequency AC signal, it is one of the best ethernet barriers in the market today. It also features N Female antenna connection suitable for N Male antenna,3/4” npt-m thread connection, stainless steel housing, double connector execution, no coax cable, RP-SMA Female coaxial connector suitable for RP-SMA Male radio connection and ax RF power input 2 Watts (33dBm).

ATEX Rating

Hazardous Area Rating

IECEx Certified

$36822

Trusted Clients

Similar Category:

Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200RXN

  • ATEX Zone 1/21
  • Class I Division I
  • Class II Division I
  • IECEx
  • ATEX Apparatus Certified
  • IECEx apparatus certified
  • USA and Canada Listed Equipment (cQPSus)
  • optimized frequency range from 700MHz to 3,9GHz & 4,6GHz to 6GHz
  • N Female antenna connection suitable for N Male antenna
  • 3/4” npt-m thread connection
  • Stainless steel housing
  • RP-SMA Female coaxial connector suitable for RP-SMA Male radio connection
  • double connector execution, no coax cable
  • max RF power input 2 Watts (33dBm)
  • ambient temperature range -40°C to +85°C (T5) / +70°C (T6)

Introducing the new Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200RXN is designed to be used directly with listed explosion housings or conduit fittings. This coupler is an integrated blocking circuit prevents hazardous energy reaching the antenna if a radio, modem or access point failure occurs. It also allows antenna removal in hazardous areas.

The couplers powerful design allows for the connection to approximately any radio and antenna. It is a highly flexible cost-effective solution to hazardous area radio system deployment. The coupler can also be used as a cable bulkhead.

Solexy I S Antenna Barrier

The Antenna Coupler function is to block DC signal and provide very high impedance to low frequency AC signal.Fitting is approved for hazardous location and can be installed with a simple wrench.

Features

  • Short Circuit Protection – include integrated blocking circuitry
  • Environmental Protection – All required circuitry is recessed into fitting and encapsulated against harsh environment.
  • Certification – The RX series is certified ATEX, IECEx and for USA and Canada as an apparatus, and can be installed per the conditions of acceptability, without further assessment. North America approval ( USA and Canada ) includes Class and Divisions and Zones. IECEx certifications is issued from an Australian noticed  body, therefore RX can be installed Queensland mine.
  • No Sealing Fitting Required – Permits a wide variety of passive antennas to be installed in hazardous areas.
  • Antennas may be removed and/or installed with power on.Perfect for a cable bulkhead connection.
  • Isolated Antenna Ground – optional antenna ground isolation ( RX 1..) from housing ground,combined with positive circuit,solves ground loop issues in case of remote mounted antennas and prevent potential ground noise to interfere with RF signal.

Specifications

ATEX certification
nr. TÜV CY 18 ATEX 0206158 X
Ex I M2 (M1) Ex db mb [ia Ma] I Mb
II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T5…T6 Gb
II 2 (1) D Ex mb tb [ia Da] IIIC T80°C…T100°C Db
Standard Ref.EN 60079-0, EN 60079-1, EN 60079-11, EN 60079-18, EN 60079-31
IECEx certification
nr. IECEx MSC 19.0001X
Ex db mb [ia Ma] I Mb
Ex db mb [ia Ga} IIA/IIB/IIC T5….T6 GbEx mb tb [ia Da] IIIC T80°….T100°C Db
Standard Ref.IEC 60079-0, IEC 60079-1, IEC 60079-11, IEC 60079-18, IEC 60079-31
USA & Canada certification
cQPSus LR-1504-3
Class I, Division 1, GROUP ABCD; Class II, Division 1, GROUP EFG
[Ex ia Ga] IIC; [Ex ia Da] IIIC
Class I, Zone 1, AEx db mb [ia Ga] IIA/IIB/IIC T6...T5 Gb
Zone 21, AEx mb tb [ia Da] IIIC T80°C...100°C Db
Ex db mb [ia Ga] IIA/IIB/IIC T6...T5 Gb
Ex mb tb [ia Da] IIIC T80°C...T100°C Db
Standard Ref.CAN/CSA C22.2 No. 60079-0 UL 60079-0
CAN/CSA C22.2 No. 60079-1 UL 60079-1
CAN/CSA C22.2 No. 60079-11 UL 60079-11
CAN/CSA C22.2 No. 60079-18 UL 60079-18
CAN/CSA C22.2 No. 60079-31 UL 60079-31
CAN/CSA C22.2 No. 60950-1 UL 60950-1
CAN/CSA C22.2 No. 25-17 UL 1203
CAN/CSA C22.2 No. 30-M1986
CAN/CSA C22.2 No 157 UL 1203 UL 508
CAN/CSA C22.2 No. 94.2-15 UL 508 NEMA 250-2014
Maximum Fault Voltage250VDC, 250VAC 50-60Hz
Approximate Weight0.32 kg (70.6 lb)
NEMA ratingProvides a NEMA 4X connection when connected to a NEMA 4X rated enclosure
Impedance50 Ω
Ambient Temperature Range-40°C (-40°F) to +85°C (+185°F) when max RF input = 2W
(T5) (standard)
-40°C (-40°F) to +80°C (+176°F) when max RF input = 6W (T5) (optional, consult factory)
-40°C (-40°F) to +70°C (+158°F) when max RF input = 2W
(T6) (standard)
-40°C (-40°F) to +65°C (+149°F) when max RF input = 6W (T6) (optional, consult factory)
Approximate Insertion Loss (dB)
FrequencyJ versionR version
100 MHz1.3-
500 MHz0.41.2
1.4 GHz0.40.6
1.7 GHz0.50.6
2.5 GHz0.80.8
3.9 GHz-1.1
4.9 GHz-1.8
5.4 GHz-1.4
6.0 GHz-2.0

Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200RXN Certifications:

Intrinsically Safe Ethernet Barrier SOLEXY RX13S0200RXN Other Resources:

 

 

Reviews & Questions

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

What others are saying

  1. Jude

    The best product ever!

    Jude

    I installed it 3 months ago and this intrinsically safe ethernet barrier is operating flawlessly since then. I will recommend to everyone who works in dangerous environments.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest