Features
• Class I, Division 1, Group C,D
• Class I, Division 2, Group A, B, C, D 2
• UL 844 Hazardous Location
• UL 924 Emergency Lighting 1
• UL 1598 Wet Location 2
• UL 1598A Marine 2
• UL 8750 LED Safety 2
• IP 66 Rated
• IK07
• 5G Vibration
• 1000 hrs Salt Spray
• CSA C22.2 No. 137-M1981
• IECEx Ex nR II C T6 Gc
• Meets FCC Part 15, Subpart B, Class B standards for conducted and radiated emissions
Construction
• Heavy duty die-cast copper-free aluminum housing
• Stainless steel hardware
• 3/4” NPT threaded conduit wires access ports
• Weight – 2’: 17.9 lbs ; 4’: 26.7 lbs ; 4’EM: 29.8lbs
• RoHS Compliant
• Captive bolts on power supply cover
Optical System
• Heavy-duty tempered glass lens creates uniform light distribution and maximizes lumen output.
• Diffused lens optional 3
• CCT: 5000K, 3000K 2,3, or 4000K 2,3
• CRI: 70
Electrical
• Input voltage of 120-277VAC or 347-480VAC 2
• Input frequency of 50/60Hz
• Power Factor of:
• Non-Emergency Models: ≥0.9
• Emergency Models: ≥0.95
• THD <20%
• 6Kv for 40W and 10Kv for 80W surge protection2
• Battery Backup Mode1
• Output Power of 6W
• Charge Time of 24 hours
• Emergency Run Time of 90 min
• Reported L70 hours >140,000 Operation Hours @ 60°C
Environmental
• Ambient Operating Temperature
• Non-Emergency Models: -40°F (-40°C) ~ 140°F (60°C)
• C1D1 T6 Class I, Division 1, Group C, D,
• C1D2 T3C Class I, Division 2, Group A, B, C, D,
• Emergency Models: -4°F (-20°C) ~ 113°F (45°C)
• C1D1 T6 Class I, Division 1, Group C, D,
• Ambient Operating Humidity of 10%~90% RH
Finish
- RAL 7037 (Dusty Gray) polyester powder coat
Installation
• Prewired with 2’ flying leads
• Allows wiring without opening power supply cover
• Integrated 3/4” NPT threaded hub for pendant mount
• Universal trunnion bracket available, with legacy bolt patern (drill rigs)
• For installations where power surge may be possible, NICOR recommends installing additional
surge protection at the electrical distribution pane
Warranty
• 5-year limited system warranty standard
• Warranty does not cover product failure due to an overvoltage event (power surge)
Specifications
| Specifications | |
| Certifications | UL 844 & CSA22.2; Class I Division 2 Group A, B, C, D; UL1598A Marine (Salt Water), Wet Location; UL8750LED Safety; IECEx Ex nR II C T6 Gc; CSA C22.2 No. 137-M1981 |
| Housing | Copper-free, die-cast aluminum |
| CCT | 4000K, 5000K |
| Input Voltage | 100-240/277 VAC |
| Surge Protection | Philips SP1 10kA surge protector |
| Operating temperature | (-40 to 122°F (-40°C to 50°C) |
| Installation | Easy installation with three mounting options: Ceiling, Wall/Stanchion, and Hanging Chain. Included mounting bracket is drilled for legacy bolt patterns |
| Access Ports | Two at ¾” NPT |
| Finish | Gray polyester powder coat |
| FCC | Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions |
|---|
Other Resources:
– Brochure
– C1D1 Spec Sheet
– C1D1 Installation Instructions
– C1D1 EM Installation Instructions
– C1D2 Spec Sheet
– C1D2 Installation Instructions
– C1D2 EM Installation Instructions
What others are saying
There are no contributions yet.