Explosion-Proof LED Strip Lights: Pricing, Wattage per Meter & Quote

Lighting in hazardous industrial areas must do more than illuminate — it must prevent ignition, withstand harsh conditions, and provide long-term reliability. That’s why explosion-proof LED strip lights are becoming a preferred solution for Zone 1/21 and Zone 2/22 environments such as oil refineries, wastewater plants, coal mines, and chemical processing facilities.

Among the top-performing options in 2025 is the ZM-SL01 Series Explosion-Proof LED Flexible Strip Light, available from Intrinsically Safe Store. This article explores pricing, wattage per meter, certifications, mounting accessories, and how to request a custom quote for your project.

What Is an Explosion-Proof LED Strip Light?

An explosion-proof LED strip light (also called an EX LED strip) is a flexible lighting solution designed for hazardous areas where flammable gases, vapors, or dust may be present.

These lights are engineered so that no internal spark, heat, or electrical discharge can ignite the surrounding atmosphere — making them ideal for ATEX and IECEx-certified locations.

Typical Applications

• Walkways and corridors in refineries or offshore rigs

• Inside control cabinets or inspection panels

• Underground mining tunnels and conveyor systems

• Storage tanks, grain silos, or wastewater facilities

• Hazardous workstations needing compact linear lighting

Explosion-Proof LED Strip Light Price Overview

The explosion proof LED strip light price varies depending on length, wattage, IP rating, and certification type.
At Intrinsically Safe Store, the flagship ZM-SL01 Series starts around $350 USD, offering advanced EX-rated performance for Zone 1/21 and 2/22 applications.

Model	Certification	IP Rating	Wattage per Meter	Applications	Price Range*
ZM-SL01 Series Explosion-Proof LED Flexible Strip Light	ATEX, IECEx	IP66/IP67	10–15W/m	Walkways, cabinets, machine lighting	~$350.00
ZM-SL01 (Custom Lengths)	ATEX Zone 1/21	IP66	10–20W/m	Extended runs and corridors	On Request
ZM-SL01 Kit (with Driver/PSU)	IECEx	IP67	12–18W/m	Full installation sets	RFQ Required

*Prices indicative; actual cost depends on configuration, cable length, and accessories.

Tip: For bulk installations or project-based lighting layouts, request a custom RFQ for discounted per-meter pricing.

What Is the Wattage per Meter of Explosion-Proof LED Strip Lights?

Most explosion-proof LED strips like the ZM-SL01 Series operate between 10W and 15W per meter, depending on lumen output and voltage configuration (typically 24V DC).

This wattage range provides a balance between energy efficiency and brightness, suitable for hazardous areas that demand continuous, uniform light distribution.

Typical Output Metrics

Specification	Typical Value
Wattage per Meter	10–15 W
Luminous Flux	900–1,200 lumens/m
Voltage	24V DC
Color Temperature	4000–6000K
Operating Temperature	-40°C to +55°C

These characteristics make ZM-SL01 strips perfect for confined industrial spaces where high-efficiency lighting must also meet safety and thermal limits.

What Certifications Should Explosion-Proof LED Strip Lights Have?

When purchasing lighting for hazardous areas, certification compliance is non-negotiable. Always confirm your LED strip is tested to the following standards:

• ATEX (Europe) – Directive 2014/34/EU, certified for Zone 1/21 and Zone 2/22

• IECEx (Global) – International explosion-proof safety certification

• IP66/IP67 Rating – Ensures full protection from dust and strong water jets

• Temperature Class (T5/T6) – Limits surface temperature to prevent ignition

The ZM-SL01 Series carries both ATEX and IECEx approvals, allowing safe deployment in gas (G) and dust (D)classified zones.

How to Mount Explosion-Proof LED Strip Lights Safely

Proper mounting is key for ensuring mechanical stability, thermal dissipation, and safety compliance. The ZM-SL01 flexible strip light can be installed with several accessory options:

Mounting Accessories

• EX-rated aluminum channels for heat dissipation

• Transparent silicone covers for optical protection

• Explosion-proof clips and end caps to seal connections

• Magnetic or adhesive mounts for temporary installations

Installation Tips

• Use certified cable glands and sealed junction boxes

• Maintain the manufacturer’s minimum bend radius to prevent internal stress

• Always power via a compatible EX driver or PSU (sold separately)

• Avoid sharp edges or pinch points during routing

Note: Incorrect installation can void EX certification — always follow the manufacturer’s installation manual or request support from Intrinsically Safe Store’s technical team.

Do Explosion-Proof LED Strips Require Special Power Supplies?

Yes. Explosion-proof LED strips like the ZM-SL01 require EX-certified drivers or power supply units (PSUs)designed for low-voltage, constant-current output.

Recommended Power Configurations

Component	Description	Certification
EX Driver (24V DC)	Converts 110–240V AC to 24V DC	ATEX / IECEx
Inline Power Supply Unit (PSU)	Compact PSU for small installations	IP66 / EX d
Control Gear Box	Optional dimming and switching interface	Explosion-Proof Housing

Using a non-certified PSU in hazardous zones is unsafe and may invalidate certification. Always purchase the full EX kit or consult for a compatible driver when requesting a quote.

Can Explosion-Proof LED Strips Be Used Outdoors or in Wet Areas?

Yes — provided they carry at least an IP66 or IP67 rating.
The ZM-SL01 Series is fully sealed against dust, moisture, and water jets, making it ideal for outdoor walkways, perimeter lighting, and humid process zones.

Environmental Protection Ratings

• IP66 – Dust-tight and protected against powerful water jets

• IP67 – Submersible up to 1 meter for short durations

• IK07 Impact Resistance – Withstands minor mechanical impacts

These protections make explosion-proof LED strips durable even in rain-exposed offshore platforms or chemical washdown areas.

Advantages of Using Explosion-Proof LED Strip Lights

Explosion-proof LED strip lights provide unique advantages that go beyond safety compliance:

1. Flexible Design: Easily bend and adapt to confined or curved surfaces.

2. Energy Efficiency: Up to 80% lower power consumption than fluorescent tubes.

3. Low Heat Output: Prevents hot spots and ignition risks.

4. Uniform Illumination: Continuous, shadow-free light for operational clarity.

5. Durability: Resistant to vibration, corrosion, and moisture.

6. Easy Maintenance: Long lifespan (≥50,000 hours) reduces service costs.

For operators managing multiple EX zones, switching to flexible LED strips significantly cuts maintenance downtimeand energy bills while improving safety compliance.

Best Uses of Explosion-Proof LED Strip Kits

Use Case	Recommended Setup	Key Benefits
Walkway Illumination	ZM-SL01 + EX PSU + Aluminum Channel	Uniform light, glare-free safety path
Control Cabinets	ZM-SL01 Short Length + PSU	Compact, shadow-free inspection light
Machinery Interiors	ZM-SL01 IP67 + Silicone Cover	Oil and vibration resistant
Outdoor Tank Farms	ZM-SL01 + Junction Box	Weatherproof and explosion-proof
Wastewater Plants	ZM-SL01 + IP67 Accessories	Long-term corrosion resistance

Each setup can be customized per length, lumen output, and voltage, ensuring optimal coverage and compliance.

How to Request a Quote (RFQ) for Explosion-Proof LED Strip Lights

Because each project requires specific configurations, the best way to confirm your explosion proof LED strip light price is to request a custom RFQ directly from Intrinsically Safe Store.

To Request a Quote:

1. Visit the product page:
   ZM-SL01 Series Explosion-Proof LED Flexible Strip Light

2. Click “Request a Quote” or contact the sales team.

3. Include details such as:

   • Desired length (per meter)

   • Voltage and wattage requirements

   • Mounting method (cabinet, wall, or conduit)

   • Quantity and delivery location

A certified specialist will respond with tailored pricing, lead time, and technical documentation for your project.

FAQs About Explosion-Proof LED Strip Lights

1. Are explosion-proof LED strips dimmable?

Yes, when paired with a compatible EX-rated dimming controller or driver, these strips can be dimmed to control brightness.

2. What is the difference between ATEX Zone 1 and Zone 2?

• Zone 1: An area where explosive gas is likely to occur in normal operation.

• Zone 2: Explosive gas is unlikely but may occur occasionally.
  The ZM-SL01 Series is rated for both.

3. How long do explosion-proof LED strips last?

Typically 50,000 hours or more, depending on ambient temperature and usage cycles.

4. Can I cut explosion-proof LED strips to custom lengths?

Yes, but only at manufacturer-marked cut points and under guidance from a certified technician to maintain EX integrity.

5. Do I need special connectors or cable glands?

Yes. Always use EX-certified connectors and sealed glands to maintain the explosion-proof rating.

Why Buy from Intrinsically Safe Store

Intrinsically Safe Store is the industry’s leading supplier of certified explosion-proof and intrinsically safe equipment. Customers choose them because they offer:

• Verified ATEX/IECEx certification documentation

• RFQ-based pricing for competitive project rates

• Expert consultation for lighting layout and compliance

• Fast shipping and global delivery

• Dedicated support for oil & gas, chemical, and mining clients

Whether you’re illuminating a refinery walkway or a cabinet inspection zone, their team ensures you receive the correct certified model every time.

Conclusion: Get the Best Explosion-Proof LED Strip Light Price Today

Investing in an explosion-proof LED strip light means investing in safety, efficiency, and reliability.
The ZM-SL01 Series offers exceptional performance — with ATEX and IECEx certifications, IP66/IP67 protection, and affordable pricing starting at $350 — making it ideal for hazardous area lighting.

Take the next step and secure the best explosion proof LED strip light price for your project.