Intrinsically Safe Ethernet Barrier SOLEXY BAF3A0101XN040

Name: Intrinsically Safe Ethernet Barrier SOLEXY BAF3A0101XN040
SKU: BAF3A0101XN040
Price: 644.57 USD
Availability: InStock
Rating: 5.00 (1 reviews)

ATEX certified
IECEx certified
Class 1 Division 1 Groups ABCD
Class II Division 1 Groups EFG
USA and Canada Listed Equipment
Barrier Type: Intrinsically Safe suitable for safe area installation
Thread: 3/4” npt-m
Material: Aluminum (BA only)
Housing Connector: M12 female connector (D-coded)
Cable Connector: RJ45 Plug Male connector
Marking/Approvals: ATEX, IECEx, USA and Canada Class and Div and Zones
Cable Length: 40 inch (1 mt) CAT5e
Ambient temperature range: -40°C to +60°C(T5) / +85°C (T4)

The Solexy BAF intrinsically safe Ethernet couplers are an integrated protection device that facilitates Ethernet cabling installation in hazardous areas making the signal intrinsically safe. The patented (7,507,105) BAF coupler features a barrier circuit which protects the field cabling spark ignition. The BAF circuit is encapsulated and housed in an aluminum or stainless steel housing and is designed to operate as an intrinsically safe barrier located in a safe area.

The BAF intrinsically safe Ethernet coupler can be used with most PC’s, Switches, Gateways and other Ethernet devices to ensure intrinsic safety for communicating into a hazardous area.

WARNINGS:

The Solexy BAF is an associated apparatus and shall only be installed in a non-hazardous location.
This device will not work with POE, using it with PO could result in equipment damage.
This device is intended for 10/100 Mbps Ethernet.
Length of cable that it is permitted at the output of the unit is dependent on the Lo and Co values assigned, see EN/IEC 60079-14, clause 16.2.2.2.
The user should not repair this equipment.
The user should not modify the unit.
The user should not modify the unit.
The unit should not painted by the user.

The BAF is designed to be used in safe areas directly with any CAT5 or CAT5e cable system. The BAF is also designed to be used with air purge panel systems. A BXF and/or BAF coupler is required on each end of a cable installation for full protection of both the RX and TX lines.